Advanced Prca350A2 Fully Automatic Brick Recropper

• After-sales Service: Lifetime Free Technical Consulting Service
• Warranty: 1 Year
• Market Share: 100%
• Processing Time: Fully Automatic
• Applicable to: Rod or Ingot
• Color: Black
• Model NO.: Prca350A2
• Transport Package: LCL
• Specification: (L)4700*(W)2300*(H)2700mm
• Trademark: Skywiretech
• Origin: China
• HS Code: 8486103000
• Production Capacity: 1000/Year

Product Description

Overview

Equipment name: Fully automatic round bar cutting machine

Equipment model: PRCA350A2
PRCA350A2 fully automatic round rod cutting machine is suitable for cutting and removing single wafer silicon rods.
PRCA350A2 fully automatic round bar cutting machine is equipped with a self-developed fully automatic computer control system, using an intuitive and image control interface, equipped with a digital display operating platform, servo motor controls the feed speed, and PLC program control, which can realize automatic cutting and high positioning accuracy. .

Basic Specifications

Equipment size: length 4700*width 2300*height 2700 (excluding loading tooling);

Equipment weight: about 5 tons; (excluding processing ingots);
 

Outline drawing

 

Performance Parameter

No	Item	Value
1	Equipment processing capacity
1.1	Crystal rod length (mm)	200~1200 (size includes head and tail materials)
1.2	Crystal rod diameter (mm)	¢210~350
1.3	Cut off segment length (mm)	Automatic fixed length crop 200-1000
		Manual fixed length crop: below 200
1.4	Sample thickness (mm)	2±0.5
2	Equipment processing quality Note 1
2.1	Flatness (mm)	10 inch:0.25
		12 inch:0.3
2.2	Verticality (mm)	≤1mm, excluding bar abnormality Note 1
2.3	Segment length error (mm)	±1
2.4	Chips (mm)	≤5mm(Does not contain head and tail materials and does not affect subsequent squaring)
3	Equipment efficiency and productivity
3.1	Average machining efficiency (pure machining time) (min/cut)	6 (9inch)
		7.5 (10inch)
		9 (12inch)
3.2	Other auxiliary time (min/cut)	1
3.3	Total processing efficiency (average processing efficiency + auxiliary time)	7 (9inch)
	(min/cut)	8.5 (10inch)
		10 (12inch)
4	Consumable specifications
4.1	Circumference of loop wire (mm)	2960
4.2	Ring wire diameter (mm)	0.42/0.5
4.3	Wire tension (N)	70-120
4.4	Wire speed (m/s)	28-35
5	Power consumption
5.1	Total power(kw)	4.3
5.2	Power consumption (kw)	2.75
5.3	power supply	AC380V 50Hz
5.4	Inlet water pressure (Mpa)	0.3-0.5
5.5	Water consumption (m3/h)	0.6
5.6	Intake pressure (Mpa)	0.5-0.7
5.7	Air consumption (m3/h)	6
6	Equipment Specifications
6.1	Equipment size (mm)	Length 4700* Width 2300* Height 2700
6.2	Equipment weight (T)	2.5
6.3	Floor unit area load value (KN/sqm)	4.8
Note 1: The bar is required to have an equal diameter deviation of ±2mm; the bar is not twisted or bent;

 

Site & Layout Requirements

1 Environmental conditions

General cleanliness requirements;
Operating environment temperature: 5-35ºC;
Environmental relative humidity: ≤65% (guarantee no condensation), eliminate corrosive gases;

2 Factory building requirements
The height of the factory building is 3 to 4 meters, and it is recommended to be above 4 meters, including equipment maintenance space;
C25 concrete is poured flat, 250mm thick, and can bear more than 8 tons;

About Us