After-sales Service: | Lifetime Free Technical Consulting Service |
---|---|
Warranty: | 1 Year |
Market Share: | 100% |
Processing Time: | Fully Automatic |
Applicable to: | Rod or Ingot |
Color: | Black |
Customization: |
---|
Suppliers with verified business licenses
Equipment name: Fully automatic round bar cutting machine
Equipment size: length 4700*width 2300*height 2700 (excluding loading tooling);
Equipment weight: about 5 tons; (excluding processing ingots);
No | Item | Value |
1 | Equipment processing capacity | |
1.1 | Crystal rod length (mm) | 200~1200 (size includes head and tail materials) |
1.2 | Crystal rod diameter (mm) | ¢210~350 |
1.3 | Cut off segment length (mm) | Automatic fixed length crop 200-1000 |
Manual fixed length crop: below 200 | ||
1.4 | Sample thickness (mm) | 2±0.5 |
2 | Equipment processing quality Note 1 | |
2.1 | Flatness (mm) | 10 inch:0.25 |
12 inch:0.3 | ||
2.2 | Verticality (mm) | ≤1mm, excluding bar abnormality Note 1 |
2.3 | Segment length error (mm) | ±1 |
2.4 | Chips (mm) | ≤5mm(Does not contain head and tail materials and does not affect subsequent squaring) |
3 | Equipment efficiency and productivity | |
3.1 | Average machining efficiency (pure machining time) (min/cut) | 6 (9inch) |
7.5 (10inch) | ||
9 (12inch) | ||
3.2 | Other auxiliary time (min/cut) | 1 |
3.3 | Total processing efficiency (average processing efficiency + auxiliary time) | 7 (9inch) |
(min/cut) | 8.5 (10inch) | |
10 (12inch) | ||
4 | Consumable specifications | |
4.1 | Circumference of loop wire (mm) | 2960 |
4.2 | Ring wire diameter (mm) | 0.42/0.5 |
4.3 | Wire tension (N) | 70-120 |
4.4 | Wire speed (m/s) | 28-35 |
5 | Power consumption | |
5.1 | Total power(kw) | 4.3 |
5.2 | Power consumption (kw) | 2.75 |
5.3 | power supply | AC380V 50Hz |
5.4 | Inlet water pressure (Mpa) | 0.3-0.5 |
5.5 | Water consumption (m3/h) | 0.6 |
5.6 | Intake pressure (Mpa) | 0.5-0.7 |
5.7 | Air consumption (m3/h) | 6 |
6 | Equipment Specifications | |
6.1 | Equipment size (mm) | Length 4700* Width 2300* Height 2700 |
6.2 | Equipment weight (T) | 2.5 |
6.3 | Floor unit area load value (KN/sqm) | 4.8 |
Note 1: The bar is required to have an equal diameter deviation of ±2mm; the bar is not twisted or bent; |
1 Environmental conditions
General cleanliness requirements;Suppliers with verified business licenses