Color: | White and Grey |
---|---|
Material Quality: | Stainless Steel |
Capacity: | High Production Capacity |
Wire: | Easy to Change Wire |
Cutting Surface: | Flat Cutting Surface |
Transmission of Wings: | Automatic Transmission of Wings |
Customization: |
---|
Suppliers with verified business licenses
Equipment Name:Double-Station Squarer
Equipment size:(L)6960mm×(W)5227mm×(H)4168mm
No. | Item | Value |
1 | Processing capacity | |
1.1 | Ingot length (mm) |
150~950 |
1.2 | Ingot diameter (mm) |
Φ210-Φ350 |
1.3 | Squaring width (mm) |
159-240 It has half-brick cutting capabilities of 183x92 and 211x106mm (after processing) 183x92211x106mm() |
2 | Processing quality 1 |
|
2.1 | Brick edge distance tolerance (mm) |
±0.3 |
2.2 | Bricks average margin range(max-min) (mm) |
≤0.25 |
2.3 | Brick tetrahedral flatness (mm) |
≤0.25 |
2.4 | Included angle of four sides after squaring (mm) |
90°±0.1° |
2.5 | Surface roughness | ≤Ra1.8μm |
3 | Efficiency and capacity | |
3.1 | Average processing efficiency (pure processing time) (min) ()(min) |
Brick:19.5(M10x650mm,2pcs) Half-brick:28.7(M10x650mm,4pcs) :19.5(M10x650mm,2) :28.7(M10x650mm,4) |
3.2 | Auxiliary time (min) (min) |
Brick:5.6 Half-brick:8 :5.6 :8 |
3.3 | Total processing efficiency (average processing efficiency + auxiliary time) (min) (+)(min) |
Brick:25.1(M10x650mm,2pcs) Half-brick:36.7(M10x650mm,4pcs) :25.1(M10x650mm,2) :36.7(M10x650mm,4) |
3.4 | Production capacity(T/day) (Assumption: the ingot is M10, the average length is 650, the work time is 22 hours a day, and the equipment utilization rate is 95%) (T/) (:M10,650,22h,95%) |
Brick:Rod 8T/Brick 5.3T Half-brick:Rod 5.4T/Brick 3.6T :8T/5.3T :5.4T/3.6T |
4 | Consumable specification | |
4.1 | Perimeter of ring wire(mm) | 4100 |
4.2 | Diameter of ring wire(mm) | 0.42mm/0.50mm |
4.3 | Wire tension(N) | 70-120 |
4.4 | Wire speed(m/s) | 1-50 |
4.5 | Feeding speed(mm/min) | 20-1600 |
5 | Consumption | |
5.1 | Total power(kw) | 51.5 |
5.2 | Power supply | Three phase380V 50Hz |
5.3 | Water-inlet pressure(Mpa) | 0.3-0.5 |
5.4 | Power consumption(kw/h) | 11.5 |
5.5 | Water consumption(m3/h) | 9 |
5.6 | Air-intake pressure(Mpa) | 0.5-0.7 |
5.7 | Air consumption(m3/h) | 12 |
5.8 | Grease | Lubrication adopts self lubrication or grease lubrication, and the lubricating grease adopts 0 # or 00 # extreme pressure lithium grease. ,0#00#. |
6 | Equipment specification | |
6.1 | Equipment size (mm) | 6960(L)×5227(W)×4168(H) |
6.2 | Equipment weight (T) | 24.2 |
6.3 | Static load(KN/SQM) | 14.1 |
Note 1: It is required that the diameter deviation of the ingot is ±2mm; the ingot should not be twisted or bent. 1:±2mm;,; |
Suppliers with verified business licenses