Color: | White and Grey |
---|---|
Material Quality: | Stainless Steel |
Efficiency: | High Grinding Efficiency |
Accuracy: | High Loading Accuracy |
Size: | Small Size Error |
Ingot Loading: | Automatic |
Customization: |
---|
Suppliers with verified business licenses
Equipment Name:Vertical Grinder
Equipment size:(L)6150mm×(W)2850mm×(H)4950mm
No. | Item | Value |
1 | Processing capacity | |
1.1 | Ingot length(mm) | 150-950 |
1.2 | Ingot diameter(mm) | 210-330 |
1.3 | Ingot width(mm) | 158-230 |
2 | Processing quality1 | |
2.1 | Side length(mm) | ±0.1 |
2.2 | Perpendicularity() | 90°±1.8′ |
2.3 | Flat conicity(mm) | ≤0.05 |
2.4 | Flat gradient(mm) | ≤0.05 |
2.5 | Flat roughness | Ra<0.1 (Flat) Ra<0.2(Arc) |
2.6 | Loading accuracy(mm) | ±0.1 |
3 | Efficiency and capacity | |
3.1 | Average processing efficiency (pure processing time) (min/ingot) ()(min/) |
11(The crystal rod is M10 x 650mm, and the amount of grinding left on one side is ≤0.4M10 x 650mm,≤0.4) |
3.2 | Auxiliary time (min/ingot) (min/) |
4 |
3.3 | Total processing efficiency (average processing efficiency + auxiliary time) (min/ingot) (+) (min/) |
15(Ingot is M10 x 650mm,Unilateral grinding allowance≤0.4) 15(M10 x 650mm,≤0.4) |
3.4 | Production capacity (by round ingot) (T/day) (Assumption: the ingot is M10x650mm, the work time is 22 hours a day, and the equipment utilization rate is 90%) (T/) (:M10x650mm,22h,90%) |
3.2 |
4 | Consumable specification | |
4.1 | Rough grinding wheel(mm) | Φ354*76*Φ200*15*8 |
4.2 | Fine grinding wheel(mm) | Φ304*40*Φ100*20*9 |
4.3 | Rough grinding chamfer wheel(mm) | Φ184*40*Φ80*15*9 |
4.4 | Number of rough grinding wheels | 150-200 |
4.5 | Number of fine grinding wheels | 500-800 |
4.6 | Mesh of rough grinding chamfer wheel | 150-200 |
4.7 | Rotation speed of thick and thin integrated power head(rpm/min) (rpm/min) |
3000-3500 |
4.8 | Rotation speed of rough chamfer power head (rpm/min) |
7500 |
5 | Consumption | |
5.1 | Total power(kw) | 77 |
5.2 | Power consumption(KWh) | 22 |
5.3 | Power supply | 380V 50Hz |
5.4 | Water-inlet pressure(bar) | 0.3-0.5 |
5.5 | Water consumption(m3/h) | 3-5 |
5.6 | Air-intake pressure(bar) | 0.5-0.7 |
5.7 | Air consumption(m3/h) | ≤21 |
5.8 | Lubrication | Lubrication adopts self lubrication or grease lubrication, and the lubricating grease adopts 0 # or 00 # extreme pressure lithium grease. ,0#00#. |
6 | Equipment specification | |
6.1 | Equipment size (mm) | 6150×2850×3250(Without balance cylinder)6150×2850×4950(With balance cylinder) |
6.2 | Equipment weight (T) | 17.2 |
6.3 | Static load(KN/SQM) | 24 |
Note 1: For materials, the deviation of the upper and lower ends of the bar shall be ≤ 2mm. One side grinding allowance on four sides of the bar ≥ 0.2mm; 1:≤2mm;≥0.2mm; |
Suppliers with verified business licenses