Mono Silicon Seven Cutter Ingot Cropper

• Market Share: 85%
• Color: White
• Certification: CE
• Consumables: Loop Wire and Pulley
• Transport Package: FCL
• Specification: 16100mm× 3210mm× 2910mm
• Model NO.: MTM370/7
• Trademark: Skywiretech
• Origin: China
• HS Code: 8486103000
• Production Capacity: 1000/Year

Product Description

Equipment Cutting Display

 

Factory requirements

Equipment Overview

Equipment Name:Cropper-Seven Cutters

Equipment Model:MTM370/7C

MTM370/7C is used for cutting and slicing of ingots. The equipment contains seven sets of ring wire cutting units, the first and last two cutting units hang two ring wires, and the middle five cutting units hang one ring wire, which can simultaneously divide the ingot into 8 segments at most (including the top and tail segments) and take two sample pieces (one piece each from the top and tail segments).

MTM370/7C is equipped with a self-developed fully automatic computer control system, and adopts an intuitive and vivid control interface, which can realize operations such as automatic feeding of ingots, automatic length fixing, automatic cutting, and automatic wire retraction.

The equipment is also designed with the functions of automatic alignment of the first knife and one-key automatic flipping of the crystal line. It can be selected according to customer needs.
 

Basic Specifications

Equipment size:(L)16100mm×(W)3210mm×(H)2910mm 

Equipment Weight: about 21.7 T.(Excluding ingot)

Equipment Outline Drawing
 

Performance Parameter

No.	Item	Value
1	Processing capacity
1.1	Ingot length(mm)	1000~5200
1.2	Ingot diameter(mm)	φ210~340
1.3	Length of cut-off segment(mm)	First segment240~950 Other segments360~950
1.4	Sample thickness(mm)	2±0.5
2	Processing quality^1
2.1	Flatness(mm)	M10≤0.25; G12≤0.3;
2.2	Verticality(mm)	≤0.5(9/10-inch) ≤0.8(12-inch)
2.3	Segment length error(mm)	±1
2.4	Average chipping(mm)	≤5 (Does not contain top and tail chipping)
3	Efficiency and capacity
3.1	Average processing efficiency (pure processing time) (min/ingot)	9-inch:average≤6; 10-inch:average≤7.5; 12-inch:average≤9
3.2	Auxiliary time (min/ingot)	3-4
3.3	Total processing efficiency (average processing efficiency + auxiliary time) (min/ingot	9-inch:average≤9.5; 10-inch:average≤11; 12-inch: average≤12.5
3.4	Production capacity (by round ingot) (T/day) (Assumption: the ingot is M10, the average length is 3000mm, the work time is 22 hours a day, and the equipment utilization rate is 80%)	About 34 34
4	Consumable specification
4.1	Perimeter of ring wire(mm)	2960
4.2	Diameter of ring wire(mm)	0.42/0.5
4.3	Ring wire service time(cut/ingot) (Using Skywiretech technology, Skywiretech guide pulley, cooling water PH 5.5-7, COD <500mg/L, SS <400mg/L)	0.42: M10:110 G12:90 0.5: M10:125 G12:100
4.4	Wire tension(N)	70-120
4.5	Wire speed(m/s)	28-35
5	Consumption
5.1	Total power(kw)	42.25
5.2	Power consumption(KWh)	≤20
5.3	Power supply	Three-phase 380V 50Hz 380V 50Hz
5.4	Water-inlet pressure(bar)	3-5
5.5	Water consumption(m^3/h)	≤3.5
5.6	Air-intake pressure(bar)	5-7
5.7	Air consumption(m^3/h)	≤36
6	Equipment specification
6.1	Equipment size (mm)	16100mm×3210mm×2910(Including loading and unloading roller frame,) 8261×3210×2910(Excluding loading and unloading roller frame,)
6.2	Equipment weight (T)	Weighs about 21.7; (excluding processed ingot)
Note 1: It is required that the diameter deviation of the ingot is ±2mm; the ingot should not be twisted or bent.

Site & Layout Requirements

1 Environmental conditions

General cleanliness requirements;
Operating environment temperature:5-35ºC
Environmental relative humidity: ≤ 65% ( guarantee that no condensation occurs), eliminate corrosive gases.

2 Factory requirements
The height of the factory building is 3-4 meters, and it is recommended to be more than 4 meters, including equipment maintenance space.

C25 concrete is poured flat, and the load-bearing capacity is more than 1.5 tons/m2 (referring to the average load-bearing area on the equipment unit area, not the load-bearing area on the contact area between the equipment feet and the ground).
 

Factory Requirements

Item	Requirement
Electricity	Power supply: three-phase AC380V (±5%), three-phase four-wire system, effective grounding Frequency: 50Hz Capacity: 52.8KVA, total circuit breaker 100A Power supply bus: 3X25mm^2 +2X16mm^2
Compressed air (total 1 access source)	Air supply pressure: ≥5bar Air supply volume: ≥650L/min,dry air Air inlet pipe: Φ12mm pneumatic quick coupling
Cooling water: tap water (If using reuse water, PH 5.5-7, COD<500mg/L, SS<400mg/L)	Inlet pressure: 3bar~5bar Total flow rate: 60~65L/min Water-inlet pipe: inner diameterφ32hose
Cooling water drainage ( total 2 access sources)	The drainage pipe is a 90°PVC elbow with an inner diameter of Φ110mm (one on each side)
Hoisting and transportation	Crane: over 25T, 1 Straight transport tanks (ground cattle): 6T, at least 4 vehicles Steering transport tanks (ground cattle): 6T, at least 1 Jack: 10T, 1 piece Forklift: 10T, 1

About Us